How to Make Vessel Movements

Once you are finished with a Vessel in Production, you will need to tell the system that the liquid has been moved.

Go to Production - Vessel Summary, click Actions on the relevant Vessel and select Add Vessel Movement.

Enter the *Volume Leaving the Vessel.
Select either Estimated Vessel Volume or enter a specific Measured Vessel Volume after the liquid has left the vessel.
Select which Vessel the liquid is moving to from the dropdown at the top right.
Now enter the Volume Arriving at the new Vessel.
Select either Estimated Vessel Volume or enter a specific Measured Vessel Volume after the liquid has arrived.
Add any notes and confirm the time and date.
Click Add Movement.

Emptying Vessels and Removing from Assembly.

Once you have made a movement from a Vessel, you may want to specify to the system that it is now completely empty.

Go to Production - Vessel Summary, select Actions on the Vessel in use and click Empty Vessel, then click OK to confirm.

If you are no longer using this Vessel for its current Batch you will need to release it for use again for new Batches.

Go to Production - Vessel Summary, click Actions on the relevant **Vessel ** then click OK to confirm.

Combining Batches

If you want to make a Vessel Movement to combine different Batches, you will need to make an Output to an Existing Assembly. For full instructions go to the How to Output from Vessels link below.

For further help on other Production functions, please click on the links below to see the full help guides:

How to Start a Batch in Production
How to Use Ingredients
How to Record Quality Control Test Results
How to Make Vessel Movements
How to Empty Vessels
How to Output from Vessels
How to Record Vessel Maintenance